HANSAMEDIPRO XS

0164 2103 0074
Single-handle lavatory faucet

  • Flow rate 12L/min measured at 45 PSI
  • Adjustable flow limiter up to 5.67 l/min
  • Dezincification-resistant brass valve body
  • Lead content less than 0.25%
  • Short lever
  • C+F identification
  • Laminar jet breaker
  • Temperature limiter
  • Copper supply fittings
  • Express fixing kit
  • Fixed spout
  • Hansa ceramic cartridge
  • Temperature-resistant to 80°C/30 min for thermal shock disinfection

 

 

ASMS A112.18.1/CSA B125

TECHNICAL SHEET

HANSACLINICA

8861 9085 0074
Finish shower set

  • Finishing kit for concealed shower mixer
  • Application: Shower with shut-off valve for handshower.
  • Flow rate: 24L/min measured at 45 PSI
  • Faucet body in dezincification-resistant brass, chrome finish
  • Temperature control handle
  • Thermostatic cartridge
  • Non-return valves
  • Thermal decontamination function activated by key
  • Reactivation without temperature adjustment
  • Round wall rose
  • Lockable

 

 

TECHNICAL SHEET

 

HANSACLINICA

8862 9085 0074
Electronic faucet

  • Flow rate: 24 l / min, measured at 3 bars
  • Valve body: dezincification resistant brass, chrome finish
  • Temperature control handle
  • Thermostatic cartridge, non-return valve (s)
  • Thermal disinfection according to DVGW W 551
  • Round wall rosette
  • Functional unit: BLUECLICK, BLUETUNE
  • Protected against backflow for domestic use (according to DIN EN 1717)
  • Safety lock against scalding 38 °C (36 ° -44 °)
  • Hot water supply max. +85 °C
  • Working pressure 1-10 bar
  • Diameter 170 mm
  • EN1111 standards
  • Acoustic class I (ISO 3822)
  • Thermal desinfection, possible without readjusting

 

TECHNICAL SHEET

HANSAMEDIC LAJOIE COBRA Mains supply with converter

109.010.11US.HWA
Electronic faucet

  • Flow rate: 5.7l/min, measured at 3 bar (45 PSI) flow pressure
  • Faucet body: dezincification resistant brass
  • Verified compliance with regulations regarding average weight of 0.25% lead content
  • Laminar outlet
  • Mixed water temperature adjustable with side lever (fixed setting possible)
  • Flow duration: 0.5-4 seconds (preset: 1.6 seconds)
  • Express fixing kit
  • Two reinforced connection hoses and anti-impurity filters
  • Non-return valves integrated into the faucet body
  • Projection: 4 ¾ in (122)
  • Mains supply 120V/60Hz
  • Resistant to a temperature of 80ºC/30 min for thermal shock disinfection
  • Z317.1
  • 120V/60Hz mains power supply
  • 24VAC to 6.75VDC converter
  • Connection power 0.5W

TECHNICAL SHEET

Parts for thermostatic mixer 08040190 and 08040290

HANSAPARTS

Parts for thermostatic mixer model 0804 0190 (old model for 0804 0290)

    Serial
1.0 Brass body 08 040 190
1.1 Plastic box 59 911 500
1.2 Plastic outlet closing 59 911 501
1.3 Protective plastic cover 59 911 502
1.4 Screw 5 X 25 mm 59 911 503
1.5 Screw 5,5 X 32 mm 59 911 504
1.6 Water stop 59 911 505
2.0 Cartridge sleeve 59 911 514
2.1 O-Ring 40 X 20 mm 59 911 507
3.0 Stop/strainer/non-return 59 911 508
3.2 O-Ring 25 X 2,5 mm 59 905 053
3.3 O-Ring 25 X 2,5 mm 59 911 509
3.4 Screen 59 911 510
3.6 Stop assy 59 911 511
4.0 Thermostatic cartridge 59 901 640
4.1 O-Ring 27 X 2 mm 59 901 532
4.2 O-Ring 35 X 2,5 mm 59 905 020
4.3 VAllen screw 4 X 4 mm 59 901 027
4.4 Locking handle 59 911 515
5.0 O-Ring 52 X 1 mm SW50 59 911 516
5.1 O-Ring 52,52 X 1,78 mm 59 906 841
6.0 Plug O-Ring 13 mm 59 905 012
6.1 O-Ring 18 X 2 mm 59 901 422
7.0 Plug 13 mm 59 905 013
9.0 Tilling gasket 59 911 418
10.0 Manchon pour alimentations inversées 59 911 430

Parts for thermostatic mixer 08040100 and 08040290

HANSAPARTS

Parts for thermostatic mixer model 0804 0100 (old model for 0804 0290)

    Serial
1.1 Styrofoam block 59 905 854
3.0 Screws 5 X 65 mm 59 904 847
4.0 Temperature control handle 59 906 966
4.1 Allen screw 6 X 11 mm SW 2,5 59 901 609
5.0 Locking handle 59 904 915
6.0 Thermostatic cartridge 59 901 640
6.1 O-ring 27 X 2 mm 59 901 532
6.2 O-ring 35 X 2,5 mm 59 905 020
6.3 Set screw 4 X 4 mm SW2 59 901 027
7.0 Non-return valve & strainer 59 901 610
7.1 Mesh strainer 59 901 638
8.0 Stop valve assy 59 901 644
10.0 Bronze plug 13 mm (½”) 59 905 013
12.0 Temperature control extension 59 901 607
12.1 Temperature handle extension 59 901 647
12.2 Extended Locking handle 59 901 643
12.3 Long screws 5 X 100 mm 59 901 639
13.0 Temperature Locking device 59 901 918

Parts for faucet 0448 0100

HANSAPARTS

    Serial
2.0 Top attachement assy 59 912 221
2.1 Bottom attachment assy 59 912 222
2.2 Chrome plated cap 59 912 223
3.0 Sliding hook assy 59 912 224

Parts for hand shower

HANSAPARTS

Parts for hand shower models 0430 0100, 0431 0100, (0432 0100), 0433 0100 and 0434 0100

    PROJET
430 0100
MONOJET
431 0100
DUOJET
432 0100
TRIJET
433 0100
DYNAJET
434 0100
1.0 Shower spray screw and cap   911 288 911 288 911 288 911 288
1.1 Shower spray 911 439        
2.0 Strainer 906 859 906 859 906 859 906 859 906 859
3.0 Flow reducer     911 289    
4.0 Flow reducer 911 290 911 290      

HANSAMIX

0114 2283 0074
Single-handle faucets

  • Single-lever sink faucet
  • Swivel spout
  • Ceramic cartridge
  • Laminar jetbreaker
  • Temperature limiter
  • Adjustable flow rate limiter up to 12.5 l/min
  • Stainless steel hoses
  • Built-in strainer
  • Temperature-resistant to 80°C for 30 minutes for thermal disinfection

 

 

ASMS A112.18.1/CSA B125

TECHNICAL SHEET

HANSAMEDIC LAJOIE COBRA Sector

109 010 0074
Electronic faucet

  • Flow rate: 5,67 l/min at 45 PSI hydraulic pressure
  • Body: DR brass
  • Laminar stream nozzl
  • Adjustable mixed water temperature with lateral handle (pre-set: 1,6 second)
  • Rapid installation system
  • Two flexible connection hoses and dirt-collecting filter
  • Non-return valves integrated into the faucet’s body Projection: 4 3/4’’ (122 mm)
  • Power supply 120V/60Hz
  • Resistant to 80°C temperature for thermal shock disinfection

 

 

TECHNICAL SHEET